We put at your disposal a highly qualified human team, which added to the capabilities of our laboratory allows us to test, certify or validate materials, components, systems or products.
Calibration Laboratory accredited by ENAC Nº 75/LC10.050 UNE-EN ISO/IEC 17025
Testing Laboratory accredited by ENAC Nº 100/LE257- UNE-EN ISO/IEC 17025
Noise Testing Laboratory accredited by ENAC Nº 100/LE 2703 – UNE-EN ISO/IEC 17025
Inspection entity accredited by ENAC Nº 411/EI712 – UNE-EN ISO/IEC 17020 (WEIGHING INSTRUMENTS WITH NON-AUTOMATIC OPERATION)
ENAC website to consult the directory of accredited entities
To calibrate a measuring equipment in the laboratory, we compare it with other more precise equipment called a standard, to estimate its accuracy (error) and precision (uncertainty), or in other words, to determine its measurement performance.
ITAINNOVA is a Control Body accredited by ENAC with accreditation No. 411/EI712 according to the criteria included in the NE-EN ISO/IEC 17020 Standard and in Article 58 of R.D. 244/2016, for the performance of State Metrological Control activities: in-service instrumentation phase.
Our laboratories are equipped with advanced and unique equipment for testing in most industrial sectors. We can perform the verification of materials, components and products through the different tests performed at the institute.
ITAinnova’s simulation tools have as fundamental objectives the functional evaluation, durability and long term behavior of the different parts that compose a product.
We advise on failure analysis of components or production systems, design of mechanical or electrical systems, electromagnetic compatibility problems, product certification or interpretation of standards, etc.
| Static Universal Testing Machines of 20Tm and 100 Tm Servosis |
| Universal Testing Machine 100 kN MTS with temperature control chamber |
| Zwick Universal 5 kN Testing Machine |
| Universal Torsional Machine up to 500 Nm |
| Instron bedplate with 2 linear cylinders of 50kN and one of 25kN, high precision and 1 dynamic rotary cylinder of 2000N-m and +-50º. |
| Servosis bed with 3 linear cylinders ranging between 20kN and 100kN |
| Charpy pendulum for metals up to 300J with cryogenic chamber for tests down to -80ºC. |
| Universal Brinell, Vickers and Rockwell hardness testers |
| Vickers microhardness tester |
| Portable Brinell hardness tester |
| Portable rebound hardness tester |
| Shöre A, Shöre D and IRHD-micro hardness testers for plastics and elastomers |
| Vicat |
| MGCPLUS and SPIDER acquisition equipment |
| Force, pressure, displacement, etc. sensors… |
| Elevator testing and verification towers |
| Microwave oven, precision cutters, automatic laminators, |
| Hot mounting press, grinding and polishing equipment, … |
| Ultrasonic and magnetic induction thickness gauges |
| Pycnometer, glossmeter, colorimeter, König-Persoz hardness tester, durometer rod, Taber abrasion tester, variable height impact tester, mandrels,… |
| Automatic C and S analyzer |
| Graphite furnace atomic absorption atomic absorption spectrometer (GFAAS) |
| Plasma Atomic Emission Spectrometers (ICP-OES ) and Spark |
| Infrared FTIR spectrometer with UATR accessory |
| Differential Scanning Calorimeter (DSC) |
| Inverted optical microscopes with attached digital camera and image analysis software |
| Macrography equipment: loupes, illuminators, digital cameras, etc. |
| Temperature and humidity chambers with different working ranges and dimensions (Tª from -70ºC to +180ºC and RH from 5% to 95%). |
| Salt fog chambers |
| Cyclic corrosion chamber |
| SUNTEST XXL+ climatic chamber with xenon-arc light aging |
| Walk-in climatic chamber (21000 liters capacity) |
| Muffle ovens and stoves with different temperature ranges and capacities (up to 400 ºC and 1400ºC) |
| Inspection equipment (stands, magnifying glasses, illumination devices, cameras, etc.) |
| Image analysis software |
| Humidity and temperature probes and recorders |
| Semi-anechoic chamber (10 m): one of the few facilities of its kind in Spain and Europe, with approximate dimensions of 18 x 9 x 7 m . Additional equipment includes: Radio frequency amplifiers from 9 kHz to 6 GHz |
| Dynamometer system for full vehicle operation in testing of |
| EMC |
| Electromagnetic field generation antennas from 9 kHz up to 18 GHz |
| Semi-anechoic chamber (3 m) |
| EMI receiver from 20 Hz to 26 GHz |
| LISN single-phase, three-phase and automotive LISN |
| Periodic bilog and horn antennas for electromagnetic field measurement from 9 kHz to 18 GHz |
| Radio frequency amplifiers up to 4.2 GHz |
| Signal generators up to 20 GHz |
| Radioelectric disturbance generators: TER/R, shock waves, voltage variations and interruptions, etc. |
| Broadband probes for radio spectrum measurement |
| Climatic chambers |
| Thermography camera |
| Impact testers for determination of impact resistance (IK grades) |
| Installation for determination of water and dust resistance (IP rating) |
| Chambers for the determination of fire resistance (flammability index) |
| Dielectric strength, leakage current, insulation resistance, grounding continuity and earth continuity meters |
| Three-coordinate measuring device |
| Profile projector |
| Horizontal coordinate measuring device |
| Roughness meter – profilometer |
| Block comparator |
| Ultrasonic Thickness Gauge |
| Accuracy level |
| Set of longitudinal pattern blocks |
| Angle pattern block set |
| Pattern ring set |
| Mass comparators with different working ranges (from 1 mg to 500 kg) |
| Class E2, F1, F2 and M1 standard masses for calibration of mass standards in the laboratory. |
| Class F1, F2 and M1 standard weights for on-site calibration of Non-Automatic Weighing Instruments (IPFNA) up to 60 t |
| Momentum generator bank |
| Moment transducers |
| Force transducers |
| Measuring bridge |
| Set of Brinell hardness standard plates |
| Rockwell A, B, and C hardness standard plate set |
| Vickers Hardness Standard Plate Set |
| Standard hardness tester for Shore A and D hardness measurement |
| Deadweight scale, piston-cylinder assembly and set of calibrating masses |
| Hydraulic pressure controller |
| Hydraulic digital pressure gauge |
| Pneumatic pressure controllers |
| Digital pneumatic pressure gauges |
| Zener Reference-Pattern 1.018 V and 10 V |
| Resistance standard 1 W and 10 kW |
| Reference Multimeter 8 ½ digits 1000 Vdc/ac, 20 Acc/ac, 20 GW |
| Multifunction calibrator 7 ½ digits 1000 Vdc/ac, 2.2 Acc/ac, 100 MW |
| Resistor Decade Boxes from 0.01 W to 1 TW |
| Calibrator for Pt-100 and Thermocouples K,J,T,B,R,S,N,E |
| B.T. Tester Calibrator. |
| Calibrator for Mechanically Driven Timers |
| AC precision resistor bridge (± 0.25 mK) |
| Platinum Resistance Thermometers standard (25, 5W) and semi standard (100 W) |
| Thermostatic Baths, range -40 to 250 ºC |
| Portable dry-block ovens, range -40 to 1200 ºC |
| R/S standard and semi-pattern thermocouples K and N |
| 30-channel portable precision thermometer/recorder (Pt-100 and Thermocouples) |
| Hygrometer dew point standard, range -95 to 95 ºCpr |
| Standard climatic chamber, range from 10 to 98 %hr and from 0 to 70 ºC. |
| Portable precision thermohygrometer, range from 5 to 100 %hr, from -40 to 80 ºC and -40 to 70 ºCpr |
| Water triple point cell (0.01 ºC) |
