• Logo facebook
  • Logo linkedin
  • Logo twitter
  • Logo youtube
Logo blanco itainnova

WHAT DO YOU WANT TO LOOK FOR?

THE MOST WANTED

Imagen Gobierno de Aragon
Imagen Gobierno de Aragon
Climatic tests

Climatic tests

Climatic tests

CLIMATE LABORATORY

Climatic testing services

ITA’s Climatic Laboratory performs climatic tests aimed at evaluating the type and degree of deterioration that a material, component or product may undergo when subjected to extreme thermal or climatic conditions.

  • Corrosion tests

    View photo

    Corrosion tests are intended to simulate extreme corrosive environments in order to compare the resistance of materials and/or their coatings to corrosion.

    Corrosion tests

    • Corrosion tests with salt spray:
      • Laboratory accredited by ENAC for corrosion testing with neutral salt spray according to UNE-EN ISO 9227.
      • Several 400 and 1000L chambers available.
    • Cyclic corrosion tests that combine several types of corrosive climates within the same equipment (salt spray, condensation, drying, cold, heat… ) (UNE-EN ISO 11997-1, UNE-EN 60068-2-52, PV1210, PV1208, VDA621, ASTM G85-02).
    • Resistance to filiform corrosion (UNE-EN ISO 4623).
    • Corrosion of metallic and non-organic coatings on metallic substrates (UNE-EN ISO 10289).
    • Verification of the corrosivity category of a paint system (UNE-EN ISO 12944-6).

    Download brochure: Verification of the corrosivity category of paints and paint systems

  • Aging with light

    View photo

    These tests reproduce the effects of aging when materials are exposed, in actual end-use environments, to sunlight.

    Tests for light aging

     

    • Aging with xenon arc radiation
      • Possibility to cycle in rainy or continuously dry conditions.
      • Daylight filters or radiation filtered through window glass.
      • Plastics (UNE-EN ISO 4892-2) Furniture (UNE-EN 15187) Paints (UNE-EN ISO 11341).

  • Climatic tests

    View photo

    Climatic tests allow you to determine the influence of temperature and humidity on the properties, functionality and durability of your products.

    Climatic tests

    • Condensation atmosphere. Moisture resistance tests
      • Single-sided exposure. UNE- EN ISO 6270-1.
      • Booth exposure. UNE- EN ISO 6270-2.
    • Climatic tests
      • Tailor-made or standard tests under cyclic or constant conditions.
      • They combine temperature (from -45 ºC to 180ºC) and humidity (10 to 98%).
      • Several climatic chambers of different capacities are available.
      • Large climatic chamber type WALK-IN (20000L).
    • Thermal aging in stoves or muffles
      • Several stoves and muffles of different capacities are available.
      • Large stoves (600 L).

  • Paints, coatings, etc.

    CLIMATIC TESTS FOR PAINTS AND COATINGS

    • Verification of the corrosivity category of a paint system (UNE-EN ISO 12944-6)
    • Corrosion tests :
      • Salt fog corrosion. Laboratory accredited by ENAC for corrosion testing with neutral salt spray according to UNE-EN ISO 9227:2012.
      • Cyclic corrosion (UNE-EN ISO 11997-1, UNE-EN 60068-2-52, PV1210, PV1208, VDA621, ASTM G85-02)
      • Resistance to filiform corrosion (UNE-EN ISO 4623)
      • Corrosion of metallic and non-organic coatings on metallic substrates (UNE-EN ISO 10289)
    • Moisture resistance. Water condensation atmosphere (UNE-EN ISO 6270-2 and UNE-EN ISO 6270-1 )
    • Aging with Xenon arc radiation (UNE- EN ISO 16474-2), exposure to weathering (PV3929, PV3930)
    • Climatic aging with constant or cyclic temperature and humidity conditions. Large capacity climatic chamber (2 m x 4 m)
    • Evaluation of the degradation of coatings (UNE-EN ISO 4628):
      • Degree of blistering, rusting, cracking, peeling, plastering
      • Degree of delamination and corrosion from one incision

    You can see
    chemical-physical characterization tests for paints and coatings
    .

ITA's laboratories are accredited by ENAC

Do you want us to help you?

Contact
Skip to content